Home / Ceramic Tile / Whitewash Ceramic Tile / Concrete Whitewash Matt Tile Green Ceramic Subway Making Tiles Wax Granite Rustic Wood Pop Art Best Cleaner Grain Slate Look Glass And Metal Mosaic Us Snow
Myra Gilliam Ceramic Tile November 08th, 2019 - 13:40:32
For plywood subfloors be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise your ceramic tiles will dislodge easily or worse break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it it must be cleaned thoroughly. For dust and other debris sweep and then mop your concrete subfloor surface and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.
Tiles form an integral part of the home and for the family clean ceramic tile is only in its best interest. Removing ceramic tile is usually a secondary job that includes the application of some tools coupled with physical power. Ceramic tiles generally do not come up easily and their removal process depends on the surface on which they are installed. For instance if they are set in mastic ceramic tiles come up easily with the help of a long-handled floor scraper. But for removing asbestos-laden mastic ceramic tiles you require special equipments and respirators. Certain things have to be taken into consideration when removing ceramic tiles. The surrounding bricks and walls should not be disturbed while removing ceramic tiles.
There are three main types of floors (or subfloors) that you might encounter when starting on your ceramic tile installation: a. A concrete floor - Working ceramic tiles over a concrete subfloor is the most ideal but you have to check and clean it of debris before you start. All the cracks and holes need to be repaired and filled in before your ceramic tile installation can start. Once your start working on your project each of your ceramic individual tiles will be bonded directly to the concrete floor. If the cracks widen this will affect your tiles as well.
For removing these elements equipments such as sharp utility knife razor blade and grout saw with wooden or plastic handle can be used. Once the tiles are free of grout and caulk tapping can be done on the tiles to check whether any of the tiles is loose. If a loose tile is located then the rest of the tiles should come off easily. For removing the first tile gently apply a thin putty knife under the edge of the tile. To facilitate the insertion of knife under the tile a hammer can be used to tap the knifes handle. When the knife or blade is halfway beneath the tile it should be exerted gradually.
Such a cermic tile would not be suitable for certain applications. For example if you intend to use the tile for a backsplash counter top or tabletop you will need a very durable tile that will hold up to frequent cleaning and in the case of a countertop or tabletop some hard use too. Stoneware clays are the most suitable for this sort of use. Stoneware is normally fired to about cone 6 (around 2200 degrees F) and is very strong. But in your inquiry dont stop with what kind of clay the tiles are made from. Glazes vary enormously and even so-called food-safe glazes can leach out chemicals stain and lose their color.
An important thing to remember is to use ceramic tiles with a slightly rough textured surface when tiling the bathroom. This is so you wont encounter accidents on a floor thats always wet. Smooth glazed ceramic tiles especially are ideal for kitchen or back porch flooring. But you shouldnt use them bathroom floors as they can be treacherous when wet. Its also important to get the right equipment and tools for the project. You can buy most of the tools and materials youll need at you neighborhood hardware store or home center. For equipment that might over your budget like tile cutters try asking your local home center or tool rental yard if they have the tools you need for rental.