Lee Ayala Glass Tile December 03rd, 2019 - 00:01:09
They opt for glass tile because of its shimmering beauty - especially when submerged. The vibrant colors that glisten from beneath the crystal clear water never fails to captivate homeowners or their guests. It is this superior appearance of glass tile that entices people to undertake these large projects. As you can probably tell these customers are making a huge investment in their properties; they expect their tile installation to be flawless and long lasting. In order to satisfy these demanding clients sales staffs have had to become well versed in the intricacies of glass tile installation. While glass tile has its own inherent quirks when it comes to installation an exterior application such as a swimming pool requires even more specialized attention and materials. The main challenge for installing glass tile outdoors is glass relatively high expansion coefficient.
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
Usually they are available mesh mounted on a fiberglass sheet or as field tiles such as subway 3"x6" 4"x4" 6"x6" and even 12"x12". Stained clear glass tiles are made of clear/translucent glass that are stained during its manufacturing process and then cut into multiple pieces. In this case you can see all the way through it even if it has a dark stain color and that is the reason they are not mesh-backed otherwise you would see the mesh through the glass even after installed. Instead they are mounted on clear-faced or paper-faced sheet. Plain or non-colored clear glass tiles are made of clear/translucent glass and do not have color in it. Though the word "plain" is used to describe these types of tiles they are extremely elegant and easy to work with if you want to give a special "touch" to a kitchen backsplash bathroom and shower or swimming pool.
Often glass tiles are translucent in appearance and any imperfection in either the setting application or the thinset is magnified. Whichever tile is being installed the substrate must be perfectly smooth using the manufacturers suggested setting materials and following their instructions exactly as written. Any "waves or grooves" in setting material are noticeable which is another reason a consumer needs to hire a contractor trained in glass tile installation. Another major quality difference between glass tiles is in the quality of the glass used during production. Oceanside Glass is famous for using recycled bottles in its production and provides consumers with a guide of how much post-consumer recycled material are used in their production and can assist with LEED accreditation. Additionally their state-of-the-art equipment for precision processing in batching changing furnaces and cooling molten glass is revolutionary.