Chris Castro Ceramic Tile November 14th, 2019 - 16:18:27
During installation tiles should be placed so that there are no gaps left between the individual tiles. Otherwise the tile can leak and seepage will occur in the spaces left behind. Seepage is a common problem in many households and the tiles are also harder to clean as dirt and dust will build up in the cracks and cannot be reached with a vacuum or sponge. Quickly clean ceramic tile will become a hopeless dream. Clean ceramic tile is also safer tile. Not only does cleaning help to extend the life and quality of tiles it can help to extend the life of the family.
Knowing the kind of subfloor youll be installing ceramic tile flooring over is important. There are three main types of subfloors you might encounter: Vinyl plywood and concrete floors. Installing ceramic tile flooring directly to your vinyl or linoleum subfloor surfaces is greatly discouraged. One it may contain asbestos fibers; and two vinyl flooring is not a solid as good ol concrete flooring. When installing ceramic tile on vinyl experts would recommend rough-sanding or scarifying the vinyl floor surface first so your tiling mortar has good grip to set on.
Dust and other chemicals can make families sick and cleaning tile helps to remove at least some of the bacteria and disease from the home. If oil or any other petroleum product spills on the tile floor it should be cleaned up right away as the tiles can become very slippery and dangerous to walk on. Clean ceramic tile saves a family from accidents as long as it is dried adequately after Ceramic tile cleaners are designed specifically to clean ceramic tile especially the surface and are available in liquid form. Cleaner is also available as a disinfectants Care should be taken while cleaning tiles as chemicals no matter how harmless can be dangerous if used improperly.
Even a glaze said to be food-safe often is not. John Hesselberth and Ron Roy in their book Mastering Cone 6 Glazes demonstrate this by placing a lemon wedge on a food-safe glazed piece of ceramics. Within hours the glaze is discolored from leaching out of the chemicals. Unfortunately the food-safeness of a glazed or handpainted ceramic tile is difficult to determine unless you can speak with the maker because of the fact that many glazes said to be food-safe are not. Which is one of the great advantages of handmade tiles - the ceramic artist can tell you if it is food-safe.
There are three main types of floors (or subfloors) that you might encounter when starting on your ceramic tile installation: a. A concrete floor - Working ceramic tiles over a concrete subfloor is the most ideal but you have to check and clean it of debris before you start. All the cracks and holes need to be repaired and filled in before your ceramic tile installation can start. Once your start working on your project each of your ceramic individual tiles will be bonded directly to the concrete floor. If the cracks widen this will affect your tiles as well.
If the current tile floor is set over a mortar bed the easiest way to remove them would be to use a large flat-bladed chisel and just hammer away. Be sure to keep yourself protected. 2) Try to get an estimate of the project by taking down the length and width of the floor area that you will be tiling. When you go window-shopping make sure to bring your measurements and discuss it with your hardware or home center specialists. Those measurements will help you a lot in estimating how much ceramic floor tiles you need to buy. It will also help you estimate how much cement and grout and the tools youll need for your ceramic tile installation.