Rochelle Key Ceramic Tile November 12th, 2019 - 10:42:22
There are three main types of floors (or subfloors) that you might encounter when starting on your ceramic tile installation: a. A concrete floor - Working ceramic tiles over a concrete subfloor is the most ideal but you have to check and clean it of debris before you start. All the cracks and holes need to be repaired and filled in before your ceramic tile installation can start. Once your start working on your project each of your ceramic individual tiles will be bonded directly to the concrete floor. If the cracks widen this will affect your tiles as well.
If the current tile floor is set over a mortar bed the easiest way to remove them would be to use a large flat-bladed chisel and just hammer away. Be sure to keep yourself protected. 2) Try to get an estimate of the project by taking down the length and width of the floor area that you will be tiling. When you go window-shopping make sure to bring your measurements and discuss it with your hardware or home center specialists. Those measurements will help you a lot in estimating how much ceramic floor tiles you need to buy. It will also help you estimate how much cement and grout and the tools youll need for your ceramic tile installation.
Most tiles are exposed to dust and they will fade over time if they are not cleaned regularly especially those with painted images or designs. It is important to have clean ceramic tile because it keeps the family healthy and happy. In the end it also saves on money and time since well-groomed tiles will last longer and will need to be replaced less frequently saving on cost labor and annoyance. A ceramic tile can be cleaned with a sponge and detergent. Ceramic tiles have a smooth surface which makes them easy to clean. Day-to-day cleaning can involve a vacuum since light upkeep throughout the week will result in consistently clean ceramic tile.
For plywood subfloors be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise your ceramic tiles will dislodge easily or worse break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it it must be cleaned thoroughly. For dust and other debris sweep and then mop your concrete subfloor surface and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.
Dust and other chemicals can make families sick and cleaning tile helps to remove at least some of the bacteria and disease from the home. If oil or any other petroleum product spills on the tile floor it should be cleaned up right away as the tiles can become very slippery and dangerous to walk on. Clean ceramic tile saves a family from accidents as long as it is dried adequately after Ceramic tile cleaners are designed specifically to clean ceramic tile especially the surface and are available in liquid form. Cleaner is also available as a disinfectants Care should be taken while cleaning tiles as chemicals no matter how harmless can be dangerous if used improperly.
Even a glaze said to be food-safe often is not. John Hesselberth and Ron Roy in their book Mastering Cone 6 Glazes demonstrate this by placing a lemon wedge on a food-safe glazed piece of ceramics. Within hours the glaze is discolored from leaching out of the chemicals. Unfortunately the food-safeness of a glazed or handpainted ceramic tile is difficult to determine unless you can speak with the maker because of the fact that many glazes said to be food-safe are not. Which is one of the great advantages of handmade tiles - the ceramic artist can tell you if it is food-safe.