Hallie Vance Glass Tile December 01st, 2019 - 21:53:15
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.
Quality mosaics offer the clients designers and architects few if any limitations on their visions. Almost anything can be designed and made from quality glass tile including furniture. The best word of advice when considering glass tile is a consumer should always consult with an authorized distributor regarding the tiles suitability for the intended use. Authorized distributors spend an enormous amount of time educating their employees and they always know who to contact for installation related questions. Please contact your distributor for a list of installers who have completed formal training. Are you looking for a one of a kind way to dress up a glass block shower wall or window? If so youll want to check out the newly introduced decorative blocks with fused glass tiles added to them.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.